Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.
|
997 Center Console The stock center console is usually a big slab of grey plastic. Add some interest to the interior by upgrading to our carbon fiber parts. If you already have an OEM carbon console, you can add our trim pieces to max out the carbon look. |
997 Center Console
The OEM center console is a large piece of tacky plastic. Replace it with our carbon version and make the largest impact possible on your interior. Part will match factory OEM carbon.
The OEM center console is a large piece of tacky plastic. Replace it with our carbon version and make the largest impact possible on your interior. Part will match factory OEM carbon.
Price:
$1,295
Status:Out of Stock - Contact MAcarbon to reserve yours!
Status:Out of Stock - Contact MAcarbon to reserve yours!
Click to Enlarge
Porsche 997 Shift Knob Cap
Replace that gray shift knob cap with our Carbon Fiber Cap. It features silver lettering. The lettering can be done in the customer's choice of color. 3 minute installation if you have a leather or alcantara knob. DO NOT order if you have the factory carbon fiber knob. On the CF knob, the cap is glued in and you will crack the knob trying to get the cap out.
Replace that gray shift knob cap with our Carbon Fiber Cap. It features silver lettering. The lettering can be done in the customer's choice of color. 3 minute installation if you have a leather or alcantara knob. DO NOT order if you have the factory carbon fiber knob. On the CF knob, the cap is glued in and you will crack the knob trying to get the cap out.
Price:
$140
Status:Silver/Yellow - In Stock! Red pattern - Out of Stock
Status:Silver/Yellow - In Stock! Red pattern - Out of Stock
Click to Enlarge
Porsche 997/987 Shift Knob Front
Need some carbon on your shift knob? Replace that worn alcantara in the front with our carbon fiber piece! Easy installation takes about thirty minutes and can be done without the aid of a mechanic. It fits both factory alcantara and leather knobs. Not for use with factory carbon fiber knobs. Shift cap and boot not included.
Need some carbon on your shift knob? Replace that worn alcantara in the front with our carbon fiber piece! Easy installation takes about thirty minutes and can be done without the aid of a mechanic. It fits both factory alcantara and leather knobs. Not for use with factory carbon fiber knobs. Shift cap and boot not included.
Price:
$185
Status:In Stock!
Status:In Stock!
Click to Enlarge
Porsche 997/987 Shift Knob Middle
Switch out the center section of your shift knob to carbon. Porsche charges $600 for their carbon knob which is probably already cloudy when you get it! Simple install. Shift knob cap shown but not included.
Switch out the center section of your shift knob to carbon. Porsche charges $600 for their carbon knob which is probably already cloudy when you get it! Simple install. Shift knob cap shown but not included.
Price:
$225
Status:Out of Stock - Contact MAcarbon to reserve yours!
Status:Out of Stock - Contact MAcarbon to reserve yours!
Click to Enlarge
970/991/997 PDK Gear Knob
Since the PDK selector is a focal point of the interior, it makes sense to do it in carbon. Porsche's version has two silly circles on the sides. Go all carbon with ours. Installs in minutes!
Since the PDK selector is a focal point of the interior, it makes sense to do it in carbon. Porsche's version has two silly circles on the sides. Go all carbon with ours. Installs in minutes!
Price:
$425
Status:In Stock!
Status:In Stock!
Click to Enlarge
Porsche 997 Shift Boot Trim
Replace that ugly gray trim piece below your shift boot that doesn't match anything else in your interior.
Replace that ugly gray trim piece below your shift boot that doesn't match anything else in your interior.
Price:
$500
Status:In Stock!
Status:In Stock!
Click to Enlarge
Porsche 997 Tiptronic/PDK Surround Panel
The Tiptronic/PDK panel is one of the pieces of the interior you will look at most frequently. Get rid of the ugly Porsche plastic and replace it with our carbon fiber. The contrast between the carbon and the silver shift gate is very eye catching. Specify which version you need: Tip or PDK.
The Tiptronic/PDK panel is one of the pieces of the interior you will look at most frequently. Get rid of the ugly Porsche plastic and replace it with our carbon fiber. The contrast between the carbon and the silver shift gate is very eye catching. Specify which version you need: Tip or PDK.
Price:
$600
Status:PDK In Stock! Tiptronic Out of Stock - Contact MAcarbon
Status:PDK In Stock! Tiptronic Out of Stock - Contact MAcarbon
Click to Enlarge
997 Front Console Extension
This is the piece that is under the center stack, in front of the shifter. This is a part that Porsche doesn't do in carbon. Your carbon center console doesn't look compete until you get this piece of carbon.
This is the piece that is under the center stack, in front of the shifter. This is a part that Porsche doesn't do in carbon. Your carbon center console doesn't look compete until you get this piece of carbon.
Price:
$485
Status:In Stock!
Status:In Stock!
Click to Enlarge
Porsche 997 Handbrake
Replace your dirty scuffed up old handbrake with this beautiful carbon one. Also included is our carbon handbrake button. Porsche charges $925! Installation takes fifteen minutes and is do-it-yourself.
Replace your dirty scuffed up old handbrake with this beautiful carbon one. Also included is our carbon handbrake button. Porsche charges $925! Installation takes fifteen minutes and is do-it-yourself.
Price:
$585
Status:In Stock!
Status:In Stock!
Click to Enlarge
Porsche 997 Handbrake Button
Add a nice touch of carbon to your 997. Installation takes just a few minutes for this small accent piece. It goes well with our other center console carbon pieces, especially our handbrake (shown in picture below).
Add a nice touch of carbon to your 997. Installation takes just a few minutes for this small accent piece. It goes well with our other center console carbon pieces, especially our handbrake (shown in picture below).
Price:
$140
Status:Made to order - 3 weeks
Status:Made to order - 3 weeks
Click to Enlarge
987/997 The Banana - Under Handbrake
This piece is a must if you have a carbon center console. Matches the factory carbon perfectly (as seen in this photo). This is a piece that the factory doesn't make, but is a must have. Installs in minutes.
This piece is a must if you have a carbon center console. Matches the factory carbon perfectly (as seen in this photo). This is a piece that the factory doesn't make, but is a must have. Installs in minutes.
Price:
$195
Status:In Stock!
Status:In Stock!
Click to Enlarge
987/997 Center Console Lid
Our carbon rear console lid makes a great compliment to the OEM console, our carbon center console, or as a stand alone piece. This is another piece that Porsche doesn't offer. Easy installation.
Our carbon rear console lid makes a great compliment to the OEM console, our carbon center console, or as a stand alone piece. This is another piece that Porsche doesn't offer. Easy installation.
Price:
$595
Status:In Stock!
Status:In Stock!
Click to Enlarge
997 Belt Buckle Receptacle Set
Are you carbon crazy? This is the product for you. We went seven years without ever thinking of doing the seat belt buckle receptacles until a customer asked us. Instead of doing just carbon, we've added a leather sleeve to hide the sensor wires. Like our steering wheels, the customer can pick out leather or suede and the stitching color. Black leather with Porsche standard grey stitching is kept in stock. With such a key piece of safety equipment, brand new parts are always used. Don't forget the rear buckles!
Are you carbon crazy? This is the product for you. We went seven years without ever thinking of doing the seat belt buckle receptacles until a customer asked us. Instead of doing just carbon, we've added a leather sleeve to hide the sensor wires. Like our steering wheels, the customer can pick out leather or suede and the stitching color. Black leather with Porsche standard grey stitching is kept in stock. With such a key piece of safety equipment, brand new parts are always used. Don't forget the rear buckles!
Price:
$795
Status:Grey Stitch version in Stock
Status:Grey Stitch version in Stock
Click to Enlarge
996/997 Rear Seat Belt Receptacle Set
If you get the front belt receptacles, you'll notice the rear ones even more. Again we combine carbon with luxurious leather to turn an eye sore into a cool detail in your Porsche. You can choose between the lower bolt section in leather or carbon. For safety, we always use brand new parts.
If you get the front belt receptacles, you'll notice the rear ones even more. Again we combine carbon with luxurious leather to turn an eye sore into a cool detail in your Porsche. You can choose between the lower bolt section in leather or carbon. For safety, we always use brand new parts.
Price:
$775
Status:Made To Order
Status:Made To Order
Click to Enlarge
MAcarbon Install Tool Kit
Our MAcarbon Interior Install Tool set is the key to an easy install experience! The pry tools are a semi-soft plastic specifically designed for installing your new carbon fiber parts. Basic: 4 tools Deluxe: 5 tools plus pouch Premium: 4 tools plus flashlight and pouch
Our MAcarbon Interior Install Tool set is the key to an easy install experience! The pry tools are a semi-soft plastic specifically designed for installing your new carbon fiber parts. Basic: 4 tools Deluxe: 5 tools plus pouch Premium: 4 tools plus flashlight and pouch
Price:
$20
Status:
Status:
Click to Enlarge
MAcarbon Carbon Cleaning Kit
We are often asked what is the best way to care for our carbon fiber pieces. Most cleaners have harsh chemicals that can attach the clear coat on CF trim. Our answer is Liquid Gloss by Detailing Dynamics. Specially formulated with DyNA Brilliance Liquid Gloss will clean and protect your interior investment. We also include a premium micro fiber cloth that perfectly compliments the Liquid Gloss. And don't worry about the funky smells you get from other interior cleaners - ours smells great!
We are often asked what is the best way to care for our carbon fiber pieces. Most cleaners have harsh chemicals that can attach the clear coat on CF trim. Our answer is Liquid Gloss by Detailing Dynamics. Specially formulated with DyNA Brilliance Liquid Gloss will clean and protect your interior investment. We also include a premium micro fiber cloth that perfectly compliments the Liquid Gloss. And don't worry about the funky smells you get from other interior cleaners - ours smells great!
Price:
$12
Status:In Stock!
Status:In Stock!
Click to Enlarge
- «« Start
- « Prev
- 1
- Next »
- End »»
Results 1 - 16 of 16