Home 
Custom Projects
Empty
| Home |
| Blog |
| About Us |
| Contact Us |
| Testimonials |
| Steering Wheels |
| Audi R8 |
| Ferrari |
| Lamborghini |
| Porsche |
| Mercedes |
| Other Marques |
| Accessories |
| Custom Projects |
| Customer Photos |
| Dealers-Installers |
| News |
| Login |
For More Information
Email Us
Or
+ 1.650.489.4415
Designed by:
A2 Design Studio
Subscribe to news
|
Custom Projects Don’t see what you were looking for on the site? We don’t advertise our new products until they are fully ready so we might already be working on just what you are looking for. And with our lamination process, we can “carbonize” almost any plastic part in the interior. Below are a few projects we have done on a custom basis. Give us a call or send us an email and we’ll get you a quick answer. |
Ferrari Stradale Paddle with Stripe
The customer requested that we add the Stradale stripe to the tip of the Ferrari shift paddle. Getting the lines straight and not sanding through the pattern while finishing them required some very careful work!
The customer requested that we add the Stradale stripe to the tip of the Ferrari shift paddle. Getting the lines straight and not sanding through the pattern while finishing them required some very careful work!
Price:
$975
Status:
Ask Us!
Click to Enlarge
Custom Sirius Radio Trim
This custom Sirius radio surround was made for a 996 Turbo customer. It perfectly matched the rest of his interior!
This custom Sirius radio surround was made for a 996 Turbo customer. It perfectly matched the rest of his interior!
Price:
$400
Status:
Made To Order - Ask Us!
Click to Enlarge
Ferrari 355 Radio Trim
This is the trim for a Sony radio installed in a customer's 355. We added CF to all of the exposed surfaces. Its a small touch to his interior but it was one of the few pieces left to do!
This is the trim for a Sony radio installed in a customer's 355. We added CF to all of the exposed surfaces. Its a small touch to his interior but it was one of the few pieces left to do!
Price:
$350
Status:
Ask Us!
Click to Enlarge
Lamborghini Gallardo Washer Covers
A customer sent in his washer covers for us to do. These came out real nice! Customer is reuqired to send us their washer covers. Turnaround is five weeks.
A customer sent in his washer covers for us to do. These came out real nice! Customer is reuqired to send us their washer covers. Turnaround is five weeks.
Price:
$625
Status:
Ask Us!
Click to Enlarge
Brockway Engineering Cover Panel
This started life as a custom project. Now we have several Brockway Turbo Boost contoler frames in stock! Very cool for Turbo owners!
This started life as a custom project. Now we have several Brockway Turbo Boost contoler frames in stock! Very cool for Turbo owners!
Price:
$260
Status:
in stock
Click to Enlarge
Greddy Boost Control Frame
We did a run of these holders for the Greddy boost control unit used by some 996 Turbo owners.
We did a run of these holders for the Greddy boost control unit used by some 996 Turbo owners.
Price:
$250
Status:
Ask Us!
Click to Enlarge
996 GT2 handbrake
This handbrake received a vinyl GT2 sticker under the laquer. The customer was doing a matte carbon interior wheich is why the part is not shiny!
This handbrake received a vinyl GT2 sticker under the laquer. The customer was doing a matte carbon interior wheich is why the part is not shiny!
Price: Call for Pricing
Status:
Ask Us!
Click to Enlarge
Porsche Custom Shift Knob
This custom shift knob was done for a special customer. It has a silver carbon body with black carbon top. The shift pattern is the design used on our Ferrari knobs. This was a lot of work and we probably won't do one again!
This custom shift knob was done for a special customer. It has a silver carbon body with black carbon top. The shift pattern is the design used on our Ferrari knobs. This was a lot of work and we probably won't do one again!
Price:
$625
Status:
Ask Us!
Click to Enlarge
997 Chrono Pod in Twill
We normally do the chrono in OEM matching 'Standard' carbon. This customer already had some parts in twill carbon in his car. So he asked us to do a chrono pod in twill carbon. It came out really nice!
We normally do the chrono in OEM matching 'Standard' carbon. This customer already had some parts in twill carbon in his car. So he asked us to do a chrono pod in twill carbon. It came out really nice!
Price:
$675
Status:
Ask Us!
Click to Enlarge