458 Install Day

Last week, a customer of ours bought a 2012 Ferrari 458 Italia. While the car was being prepped at the dealership, we were asked to come down and install some carbon fiber pieces to the already existing factory carbon that was in the car. The entire install took about half the day and we ended up needing to come back the next day for a few minor adjustments to make sure everything was just how it should be.

DSC_0379

We amplified the cars engine bay, added our new headlight switch surroundcenter console, door sills, and changed out the door handles.

DSC_0042

As you can see, the engine bay of the Ferrari 458 is fairly simple. Removing all the metal and plastic surround was pretty simple – except one part: the Fuel Pump covers. The OEM covers use an insulation that needs to be reused. Now these are hot glued in and can be a little hard to remove. Once everything is off, the 458 engine looks pretty cool. You really can get a look at what masterpiece Ferrari is putting into their super cars.

DSC_0076

The side engine bay covers and the rear panel slide in perfectly. We ended up taking these in and out to find out the best possible way to make them fit. We realized that the carbon pieces have a weather stripping already on them. We found that it would actually look better if you removed the weather stripping on the side of the panels and then reapplied the OEM weather stripping off the original panels. This gave a true OEM look and fitment.

DSC_0101

Once everything fit correctly, it was time to install the fuel pump covers. There are two bolts that hold these in and swapping them out is as easy as one, two, three!

DSC_0185

 

After the pump covers, rear panel, and side panels are installed, it was time for the engine lock and air box. For aesthetic purposes, we transferred over the emblem from the original air box over to the new carbon one. A simple process using a heat gun and one of our install tools, we pried it off, removed and reapplied new adhesive and stuck it on there.

DSC_0260

Once the engine bay was complete, it was time to take a picture =)

DSC_0312

Now it was time to move towards the interior. The headlight switch surround took about 45 minutes to install. We started out by removing the lower driver side panel, disconnected the switches, replaced the unit and then put everything back in. You can find the install guide to the headlight switch here.

DSC_0324

DSC_0344

Once everything was installed and ready to go, we got a glimpse of the dealership putting in all the cars they had on the lot. We spotted a large array of beautiful Ferraris including a few 430 Scuderias and even a brand new 488!

DSC_0210 DSC_0202

Monterey Car Week through the eyes of MAcarbon

MAcarbon had an extremely busy, but good Monterey Car Week this year. We had booths at 5 events this year and attended a few others. We started the “week” off by attending the Pre-Reunion races at Mazda Raceway at Laguna Seca. This is an awesome event and it’s very low key. There aren’t any crowds, the cars are amazing and it’s only $25. If you don’t want to pay you can watch the races from the “Cork Screw” for free.

IMG_4711IMG_4844

IMG_4873

The next event was ‘Concours on the Avenue’ in Carmel-by-the-Sea. This is a free concours event on the main drag of Carmel and most importantly…it’s free. There is always a very eclectic group of cars here and it is a must see.

IMG_5823IMG_5831

Friday was the ‘Werks Reunion’ Porsche Club of America show and we had a tent displaying our carbon parts. This show is a must for all you Porschephiles, and the coral is probably more impressive than the show itself.

IMG_5970-Edit

A couple of us left ‘Werks Reunion’ and headed over to Monterey for the inaugural ‘Exotics on Canary Row’. This was the first year for this show, but you would never know it by the amount of people and cars in attendance. We had our booth set up overlooking the picturesque Monterey Bay, and we brought along two of our customer’s cars (Ferrari 360 Spider and Audi R8 V10 Coupe). Next to us was one of 3 or 4 McLaren P1’s. Also in attendance were a few Porsche 918’s, a couple Ferrari F50’s, a Pagani Huayra, a few Ferrari La Ferrari’s and a Mercedes CLK GTR…just to name a few. This is sure to become one of the more popular events during ‘Monterey Car Week’ in the years to come.

 

IMG_6129-Edit

On Saturday evening we had our parts on display at the ‘Serata Italiana’, held by our friends at the Lamborghini Club America. This was our 6th year sponsoring this event and it’s always a blast. Our table of parts was in set up in a beautiful court yard full of stunning Lamborghini’s including the prototype ‘Asterion’ hybrid and the new Aventador SV Roadster.

IMG_6157-EditIMG_6164-Edit
When most of the events in Monterey were winding down, the Ferrari Club of America national meet was just getting started. On Sunday evening we had a booth at the Hyatt in Carmel for the national meet and had a great time talking to our old and new customers.
Monday was the Ferrari Club Concours, where we had a tent displaying our products. This was a really nice event with a great mix of Ferraris new and old.

IMG_6322-Edit

It was a tiring week, but it was a blast and we can’t wait for next year.  Click on the photos below to see the entire gallery!